湖南元素分析仪供应商

ONH836氧氮氢分析仪

高频燃烧红外检测技分析无机材料中的碳、硫含量。

采用惰性气体保护熔融法，提供各种无机材料、钢铁、有色金属、硬质合金、难熔金属、陶瓷等材料中宽范围的氧氮氢同时分析。

该仪器配置MS Windows®的软件接口，专为触摸屏操作定制。长期的开发研究与客户反馈相结合，这个简单方便的软件使得用户可以快速完整访问仪器控制，分析设置，故障诊断，数据报告， **提高日常分析的效率并节省用户宝贵的时间。 可选的Cornerstone® Mobile软件功能，使得用户可以在手机，便携式电脑及台式电脑上便捷的访问仪器数据，分析曲线图形以及仪器的状态，实现对仪器的遥控。 强力内循环水冷装置。湖南元素分析仪供应商

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

Place the Nickel Capsule containing the sample into the open port at the top of the loading head.

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode either manually or remove the crucible and press the analyze button to clean with an automatic cleaner if applicable.

Oxygen, Nitrogen, and Hydrogen in Refractory Metals

Summary

Oxygen and nitrogen are alloying elements in titanium, and are also classified as alpha stabilizing elements as they promote alpha phase alloys. Interstitial oxygen and nitrogen levels can be used to regulate the tensile strength of the material, but due to its high solubility can cause unwanted surface embrittlement. This phenomenon can be leveraged,however, under controlled processing to create surface films that increase surface hardness and wear properties.

Summary

The determination of the amount of oxygen, nitrogen, and hydrogen in iron, steel, nickel-, and cobalt-base alloys represents some of the most important quality metrics for these materials. Oxygen is used to create steel from pig iron by removing excess carbon. Oxygen content must be controlled to limit the amount of carbon monoxide that can be formed during solidification which may cause excessive porosity. Nitrogen is considered both an impurity as well as an important alloying agent. Itcan be present as a nitride or interstitially in its gaseous form. Increased nitrogen content is known to increase yield and tensile strength, thus decreasing ductility and formability. Excessive levels may evolve during solidification thus increasing porosity. High hydrogen content is the primary cause of embrittlement, blistering and flaking due to its high

mobility through the lattice and provides no potential alloying benefits. The ONH836 utilizes a high-power

electrode furnace to quickly and efficiently release the target gases from within the sample, which allows

for a very rapid simultaneous determination of oxygen, nitrogen, and hydrogen.

Cornerstone氧氮氢分析软件同时支持***的数据文档格式和可变的报告格式。

美国力可LECO氧氮氢分析仪

公司介绍：

美国力可公司(LECO)始于1936年 ，以生产用于冶金、机械、能源、化工、农业、食品及科研开发领域的各种分析仪器。

ONH836氧气/氮气/氢气元素分析仪设计用于使用惰性气体熔融技术对无机材料，铁和非铁合金以及耐火材料中的氧，氮和氢含量进行宽范围的测量。

坚固的样品加载区域可简化日常维护并大程度减少大气污染

用于氧气检测的三重红外电池可实现业内大的检测范围

通过自动化选项提高实验室生产率

可用的自动清洁器大程度地减少了两次分析之间的手动清洁需求

适用于坩埚和样品的20位往复式装载机

安装在动臂上的触摸屏界面可提供更好的人体工程学设计和直观的操作

红外（IR）和热导率（TC）检测器，没有活动部件，也无需手动调节

改善TC电池的稳定性

可绕过的OMI-2载气洗涤塔，提高了TC电池的稳定性

获得Dyanamic流量补偿可进一步增强TC细胞的稳定性

力可创新的批次和重复样品数据分组功能极大简化了样品结果输出和结果标准偏差的自动计算。广东元素分析仪咨询报价

氧氮氢分析仪怎么选？欢迎联系上海禹重科技，我司产品质量保证，欢迎咨询！湖南元素分析仪供应商

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Add approximately 0.05 g of *** Graphite Powder to a***Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

Press the Analyze button on the instrument screen,the lower electrode will close and the analysis sequence will start and end automatically.

Repeat steps 3b through 3i a minimum of three times for each calibration/drift standard used.

上海禹重实业有限公司总部位于友东路237号1幢104室，是一家从事仪器科技、医疗科技、检测科技领域内的技术咨询、技术服务，仪器仪表的修理，仪器仪表、实验室设备、机械设备及配件、机电设备及配件、电子产品、化工产品及原料（除危险化学品、监控化学品、烟花爆竹、民用易爆物品、易制毒化学品）、第二类医疗器械的销售，机械设备租赁，电子商务，货物进出口，技术进出口。的公司。公司自创立以来，投身于光谱仪，色谱仪，质谱仪，样品前处理，是仪器仪表的主力军。禹重科技致力于把技术上的创新展现成对用户产品上的贴心，为用户带来良好体验。禹重科技始终关注仪器仪表市场，以敏锐的市场洞察力，实现与客户的成长共赢。