Procedure – Powder/Chip Samples
Determine the instrument blank.
Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.
Clean the upper and lower electrode either manually or remove the crucible and press the analyze button to clean with an automatic cleaner if applicable.
Add approximately 0.05 g of *** Graphite Powder to a 782-720 Graphite Crucible.
Firmly place the crucible on the lower electrode tip or appropriate autoloader position.
Instrument Highlights and Features
Features and Benefits
LED light ring illuminates the furnace area
Choice of either argon or helium carrier gas
Novel electrode design increases heat transfer efficiency for increased stability
Non-touch interface systems are also available
User-friendly brand software
High-Performance Detector Design
Thermostatic construction provides increased protection from ambient temperature fluctuations
Optimized emitter control and detection circuitryimproves the IR cell lifetime and long-term stability,
resulting in superior accuracy and precision
Infrared detection for the determination of oxygen, thermoconductivity detection for the determination
of nitrogen
广东LECO氧氮氢分析仪咨询报价可选六轴可旋转触摸屏幕,增强了操作的工效和直观性。
仪器的亮点和优势:
特点和优势
·炉头区域LED照明系统
·炉头快速拆装的粉尘过滤装置
·装有自动旁路阀的可快速拆装氧水捕集装置
·**的动态流量补偿(DFC)保证热导池气体流量、压力恒定
高效脉冲炉冷却系统
·强力内循环水冷装置热交换效率
·双直流风扇保证持续冷却,不受电压波动的影响
·***电极炉头设计,提高脉冲炉
全自动分析系统(可选)
·自动清扫装置
·20位或100位全自动分析系统
·高效全自动真空除尘装置直接将粉尘排至仪器外部捕集器中,消除环境污染
改进的红外检测池技术
·***红外池的恒温绝热技术消除了外界环境温度的干扰
·长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定性
·氧高低双量程采用3个碳红外检测器同时检测一氧化碳和二氧化碳,保证准确定量
Procedure – Powder/Chip Samples
Determine the instrument blank.
Press the Analyze button on the instrument screen, the lower electrode will close and the analysis sequence will start and end automatically.
Repeat steps 2b through 2g a minimum of three times.
Set the blank following the procedure outlined in the operator's instruction manual.
Instrument calibration/drift correction.
Login a minimum of three Standard reps.
Weigh approximately *** grams of a calibration/drift standard into a *** Nickel Capsule; enter the mass and standard identification into appropriate rep fields. If applicable, place the nickel capsule in the appropriate autoloader position.
用户友好界面的Cornerstone™ 软件。
Procedure – Powder/Chip Samples
Prepare the instrument as outlined in the operator's instruction manual.
Login a minimum of three Blank reps.
Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open. Insert a *** Nickel Capsule (leave capsule open) into the open port at top of loading head.
Note: samples using automation should be placed in the appropriate autoloader position before starting the analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.
氧高低双量程采用3个碳红外检测一氧化碳和二氧化碳,保证准确定量。新疆专业元素分析仪多少钱
美国LECO力可氧氮氢分析仪ONH836(氧氮氢联测仪)系列硬件部分
特点和优势
1、炉头区域LED照明系统
2、炉头快速拆装的粉尘过滤装置
3、装有自动旁路阀的可快速拆装氧水捕集装置
4、**的动态流量补偿(DFC)保证热导池气体流量、压力恒定
5、改进的红外检测池技术
新红外池的恒温绝热技术消除了外界环境温度的干扰
长寿命的红外发射光源和无漂移的电路设计保证红外检测池的长期稳定
氧高低双量程采用3个碳红外检测器,同时检测一氧化碳和二氧化碳,保证准确定量
6、高效脉冲炉冷却系统
强力内循环水冷装置
双直流风扇保证持续冷却,不受电压波动的影响
新电极炉头设计,提高脉冲炉热交换效率
7、全自动分析系统(可选)
自动清扫装置
20位或100位全自动分析系统
高速全自动真空除尘装置直接将粉尘排至仪器外部捕集器中,消除环境污染
新疆专业元素分析仪多少钱
上海禹重实业有限公司致力于仪器仪表,是一家服务型公司。公司业务涵盖光谱仪,色谱仪,质谱仪,样品前处理等,价格合理,品质有保证。公司秉持诚信为本的经营理念,在仪器仪表深耕多年,以技术为先导,以自主产品为重点,发挥人才优势,打造仪器仪表良好品牌。禹重科技秉承“客户为尊、服务为荣、创意为先、技术为实”的经营理念,全力打造公司的重点竞争力。
在工业场合,有大量的电气设备在运行。电气设备的运行安全取决于设备的绝缘状态。随着时间推移,老化的电缆...
【详情】在测量交变电流的大电流时,为便于二次仪表测量需要转换为比较统一的电流,另外线路上的电压都比较高如直接...
【详情】感应式电流传感器,它们测量线圈相对于彼此移动时的感应耦合。同步通常是旋转的并且需要电连接到传感器的移...
【详情】直流/交流钳形漏电流传感器是专为在线测量600V及以下直流、交流漏电流、电流而精心设计制造的,采用新...
【详情】漏电流传感器普遍适用于电力、通信、气象、铁路、油田、建筑、计量、科研教学单位、工矿企业等领域高精度、...
【详情】电流传感器的规范:绝缘耐压为3KV的传感器可以长期正常工作在1KV及以下交流系统和1.5KV及以下直...
【详情】电流传感器电流器的特性:(1) 输出地端集中接大电解上以利降噪。(2) 电容位uF,二极管为1N40...
【详情】小编为您整理了漏电流传感器安装注意事项供大家参考 1、接线时注意接线端子的裸露导电部分,尽量防止ES...
【详情】电流传感器,是一种检测装置,能感受到被测电流的信息,并能将检测感受到的信息,按一定规律变换成为符合一...
【详情】感应式电流传感器,它们测量线圈相对于彼此移动时的感应耦合。同步通常是旋转的并且需要电连接到传感器的移...
【详情】直流漏电流变送器是一种利用磁通门原理(Flux gate)将被测直流电流转换成与该电流成比例输出的直...
【详情】