山东专业元素分析仪厂家直销

Procedure – Powder/Chip Samples

Instrument calibration/drift correction.

Calibrate/drift following the procedure outlined in the operator's instruction manual.

Login Sample with the appropriate number of reps.

Weigh approximately *** grams of appropriately prepared sample into a *** Nickel Capsule, enter mass and sample identification into appropriate rep fields. If applicable, place the nickel capsule in the

appropriate autoloader position.

Repeat steps 3c through 3i for sample analysis.

Method Selection

Two methods are described in this application note; either method can be used to analyze iron, steel, nickel-, and cobalt-base alloys. The Precision Method is recommended for general use and will provide the best precision and accuracy throughout the typical O, N, and H concentrations found in this group of metals; approximate cycle time is 3.5 minutes. The Fast Track method can be used where speed of analysis is a critical component; for example, when molten metal is being sampled and results are required in the shortest possible time. This method will produce suitable results for most samples; approximate cycle time is 2.25 minutes. As noted above, sampling and sample preparation are key elements to accurate O, N, and Hdetermination as well. It is up to the user to determine which method best meets their needs.

江苏美国LECO分析仪咨询报价高性能的红外检测器配置***恒温绝热技术，消除了外界环境温度的干扰。

Procedure - Solid Samples

Instrument calibration/drift correction.

Place the calibration/drift standard in a *** Nickel Basket, and if applicable, place the sample into the appropriate autoloader position.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

Note: samples using automation should be placed in the appropriate autoloader position before starting the

analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.

Instrument Highlights and Features

Features and Benefits

LED light ring illuminates the furnace area

Choice of either argon or helium carrier gas

Novel electrode design increases heat transfer efficiency for increased stability

Non-touch interface systems are also available

User-friendly brand software

High-Performance Detector Design

Thermostatic construction provides increased protection from ambient temperature fluctuations

Optimized emitter control and detection circuitryimproves the IR cell lifetime and long-term stability,

resulting in superior accuracy and precision

Infrared detection for the determination of oxygen, thermoconductivity detection for the determination

of nitrogen

试样加载过程中完全密闭，消除大气的中可能带来的杂质的污染。

Instrument calibration/drift correction.

a. Login a minimum of 3 Standard replicates.

b. Weigh a ~1.000 gram of a calibration/drift standard, enter the mass and standard identification into appropriate replicate fields.

c. Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

d. Place the calibration/drift standard into the open port at the top of the loading head.

e. Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

采用三个**的红外器检测氧含量，同时检测CO和CO2，然后在转化为CO2集中检测。浙江LECO氧氮氢分析仪采购

工具条、滑动条和下拉式菜单简化了校正和数据处理的参数设定。山东专业元素分析仪厂家直销

仪器仪表行业已经连续多年保持了经济高位运行的态势。即使当全球受金融风暴的影响，各个行业经济东圃有所放缓，但从全景发展情况看来，仪表行业的增长速度并没有放缓。我国现有有限责任公司（自然）企业数千多家，已经形成门类品种比较齐全，具有一定技术基础和生产规模的产业体系。但同时业内行家也指出，虽然我国测试仪器产业有了一定的发展，但远远不能满足国民经济各行各业日益增长的迫切需求。伴随移动互联网的爆发式增长，如今，它已经渐渐取代电子商务成为了整个互联网产业增速**快的领域，而移动终端的入口也随即成为了传统行业的必争之地。光谱仪，色谱仪，质谱仪，样品前处理行业进军移动互联网实现线上发展势在必行。为迎接服务型百年未有之大变局，行家认为，要重新定义中国在世界经济版图中的地位，要顺应形势实现制造升级。以华立集团在境外开发“中国工业园”的成功案例来阐述，跨国经营要成为企业主动的战略选择，在不确定性中更好地活下去，以全球化视野看问题，很多困惑在全球化过程中会迎刃而解。山东专业元素分析仪厂家直销