广东美国LECO氧氮氢分析仪价格

Sample Preparation

Sampling and sample preparation is an important issue because traditional methods used to obtain samples for oxygen and nitrogen determination are different from those recommended for hydrogen, especially when sampling molten metal. The main difference in steel sampling procedures for oxygen/nitrogen and hydrogen is due to the mobilityof hydrogen. Special precautions must be used when sampling for hydrogen. From molten steel and iron, a sample must be quickly quenched in cold water and chilled in a refrigerant such as liquefied nitrogen or a mixture of acetone and solid carbon dioxide in order to reduce losses of hydrogen from diffusion. Losses of oxygen and nitrogen from diffusion are not a problem. A sample that is taken for hydrogen and

chilled in a refrigerant can also be used for oxygen and nitrogen determination. However, a sample that is typically taken for oxygen and/or nitrogen determination is not suitable for hydrogen determination due to hydrogen loss (diffusion). Surface contamination must be removed by filing or light grinding, using care not to overheat the sample.

配置SmartLine® Remote远程诊断功能。广东美国LECO氧氮氢分析仪价格

Procedure - Solid Samples

Determine the instrument blank.

Repeat steps 2b through 2g a minimum of three times.

Set the blank following the procedure outlined in the operator's instruction manual.

Instrument calibration/drift correction.

Login a minimum of 3 Standard replicates.

Weigh approximately *** grams of a calibration/drift standard, enter the mass and standard identification into appropriate replicate fields.

Note: LECO Reference Materia***o not require preparation.See preparation statement on the reference material certificate.

广东美国分析仪价格用户友好界面的Cornerstone™ 软件。

Procedure - Solid Samples

Instrument calibration/drift correction.

Place the calibration/drift standard in a *** Nickel Basket, and if applicable, place the sample into the appropriate autoloader position.

Press the Analyze button on the instrument screen. After a short delay, the loading head slide-block will open.

Note: samples using automation should be placed in the appropriate autoloader position before starting the

analysis sequence. Once the sequence has started, the automatic analysis will start and end automatically.

Procedure – Powder/Chip Samples

Determine the instrument blank.

Press the Analyze button on the instrument screen again, the loading head slide-block will close and the lower electrode will open.

Clean the upper and lower electrode either manually or remove the crucible and press the analyze button to clean with an automatic cleaner if applicable.

Add approximately 0.05 g of *** Graphite Powder to a 782-720 Graphite Crucible.

Firmly place the crucible on the lower electrode tip or appropriate autoloader position.

氧氮氢分析仪的原理：分析样品在惰性气流存在下于石墨坩埚中加热熔融，其中脉冲炉温度可自由设定，并通过一个非接触式的光学温度传感器进行实时监控，用于实现样品的完全分解，反应所生成的CO H2和N2被带入到具有高稳定性和灵敏度的检测系统进行检测。对于CO的检测采用的是非色散性红外检测器，对于N2和H2的检测则采用热导检测器。

氧氮氢分析仪的特点：快速准确分析，自动化操作；精密气体校准；CO红外检测器，高分辨率和重现性的N、H热导池检测器；同一台仪器实现熔融提取和热提取；热提取分析时间可调；可自由选择温度*高达2500 °C；光学温度计温度测定和控制；所有检测器自动调零/自动水平控制（ALC）；数据评估的自动优化选择范围；炉自动清洁和坩埚自动进样（可选）；外设电脑进行操作和控制；样品信息保存； 所有样品数据可追踪查询；通过FTP或本地局域网进行数据传输； ON，H分析轻松切换。

可选六轴可旋转触摸屏幕，增强了操作的工效和直观性。广东美国分析仪价格

可以旁路的OMI-2 气路强化过滤装置增强了检测器的稳定性，使得分析结果更加准确。广东美国LECO氧氮氢分析仪价格

仪器仪表是用以检出、测量、观察、计算各种物理量、物质成分、物性参数等的器具或设备。真空检漏仪、压力表、测长仪、显微镜、乘法器等均属于仪器仪表。近年来，得益于机械、冶金、石化行业等仪器仪表服务领域经营状况的好转，我国仪器仪表制造业发展一路向好。中国的新型工业化进程，信息化和工业化融合的进一步加深，带动各个工业领域对于光谱仪，色谱仪，质谱仪，样品前处理等产品的需求。中国仪器仪表行业目前正处于高速发展阶段，需要与之相适应的从事仪器科技、医疗科技、检测科技领域内的技术咨询、技术服务，仪器仪表的修理，仪器仪表、实验室设备、机械设备及配件、机电设备及配件、电子产品、化工产品及原料（除危险化学品、监控化学品、烟花爆竹、民用易爆物品、易制毒化学品）、第二类医疗器械的销售，机械设备租赁，电子商务，货物进出口，技术进出口。产品营销模式相互配合。仪器仪表在工业发展中具有重要作用，这也使得仪器仪表得到快读发展。各行各业对仪器仪表的市场需求也在不断提升，贸易企业正在发展中寻求技术创新和质量提升。仪器仪表的质量、性能关系到工业安全，必须重视。广东美国LECO氧氮氢分析仪价格